Qwest QW5805 User Manual download pdf (Page 7)

Registration

The15-digit base

I D c o d e m a y

contai n numbers

a n d c h a r a c t e r s ,

including 0 through

9 and *. Make sure

you carefully and

correctly enter all 15

digits.

Your 5805 is an accessory handset ONLY, and requires a 5872 base unit to operate.

Where X

is the new handset number assigned, sequentially, by the base. If you do not enter the

correct digit sequence, you will hear an error tone. Press MUTE/DELETE to backspace to erase a

character(s) and carefully re-enter the base ID code.

Re-register existing handsets to a new base

1. Install your new base unit, the handset(s) will display SEARCHING…, press and hold the

MENU/SELECT button for two seconds.

2. The handset will display:

3. Follow steps 2 through 6 in Registration above.

De-register all system handsets

1. With the phone in idle mode, press *883244# on base.

###############

•

1. After charging the battery, the screen will display:

2. On the base unit, press MENU/SEL,

then scroll to DISPLAY

BASE ID. Press MENU/SEL, the 15 digit base ID number will

display.

3. Enter the 15 digit base ID code, if you make a mistake, press

the MUTE/DELETE key

to backspace (delete characters), then

enter the correct information.

4. Press MENU/SELECT

to complete the registration process.

5. Once a valid base ID code has been entered, the display will

blank for a second or two, and then show:

6. If the base accepts the new handset, after several

seconds the new handset will show:

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

No comments

Qwest QW5805 User Manual Page 7