Qwest QW5805 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 25
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
11
Basic operation
1. Remove the battery compartment cover on the handset by pressing on the indentation and sliding
the cover downward.
2. Lift out the old battery and disconnect.
3. Align the two holes in the new battery’s plug with the socket
pins, and snap the plug into place. Snap the battery in the
compartment, as described in Installation, on page 3.
4. Replace the cover by sliding it up into place.
5. The new battery must be charged before using the phone.
Place the handset in the charger and allow it to charge for
at least 16 hours the rst charge. The telephone might operate before that, but for best performance,
let
the battery charge fully.
Batteries
Battery care and maintenance
After your battery is fully charged, you can expect the following performance:
* Handset is off the base unit or charger but not in use.
• A fully charged battery provides an average talk time of about 8 hours.
• The battery needs charging when:
— A new battery is installed in the handset.
The phone beeps twice every ve seconds.
— The screen displays LOW BATTERY and the low battery icon.
• Place the handset in the charger so the CHARGE light turns on. The battery is typically fully
charged in 16 hours.
• You can keep the battery fully charged by returning the handset to the charger after each use.
Replacing the handset battery
If you repeatedly get a
low battery indicator,
even after charging
overnight, the battery
should be replaced.
To reduce the risk
of fire or injury to
persons or damage
to the telephone,
charge the battery
provided with this
phone (or equivalent)
in accordance with
the instructions and
limitations specied in
t
his user’s manual.
Operation Operating time
While in use (talking) up to 8 hours
While not in use (standby*)
up to 4 days
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Comments to this Manuals

No comments